The iJoy RDTA Box Mini is a very neat little mod. It utilizes the best of both worlds by having a rebuildable atomizer and the cotton dips below, into a tank. Therefore you get the benefit of the rebuildable atomizer with the convenience of a tank (no more dripping every few hits!). In this article I will be reviewing the features, usage, and specifications of iJoy’s RDTA Box Mini.
The iJoy RDTA Box Mini contains a built-in battery, which lasts almost a full day. The mod is charged using any micro USB cable, just like the ones for android phones. It has a 2600mah battery.
The rebuildable atomizer in the RDTA Box Mini supports two separate coils. When you build the atomizer, make sure you leave more cotton than you normally would, and tuck it down into the four holes underneath the atomizer. This will allow for the tank to keep the cotton ‘juiced up’ without having to constantly re-wet it.
The firing button is the perfect size for this mod and is sensitive, but not overly sensitive.
To turn the device on or off rapidly press the firing button several times. Unscrew the silver cap to reveal the hole that you pour the eJuice into. Pressing the left button will allow you to change the temperature, and pressing the right button will allow you to change the wattage, which goes up to 100W.
Dimensions: 25 x 45 x 100mm
Output Wattage: 5.0 – 100W
Voltage Output: 1 – 8V Wattage Resistance Range: 0.05 – 3.0 ohm Temperature range: 150 – 315C / 300 – 600F Tank Capacity: 2 or 6 mL Built In
The RDTA Box Mini is an excellent choice of vaporizers, and a good bang for your buck! However, beginners are more likely to like mods with tanks and pre-built atomizers that you can just screw in!